Ariens Sno-Thro 1971
This is our 7HP Ariens Sno-Thro 1971 with Tecumseh. My father bought it (again) in July 1971 for $ 371.00, and was maintained each spring with the regular maintenance performed. The parts that were on it can be changed over the years, perhaps pure 3,4,5 or 6-pin, if such an agreement, two rolling pins on the wheel, muffler, fuel cap, scraper bucket shoes rebuilt, converted to a head A spark plug from the situation, a new surface solid plate, with a design modified elderlyChute rotating assembly. If the snow is thrown, only a third used for 3 / 4 's the scoop is (ever) complete a sweep, with the exception of the first round. First gear is used for blowing, and sometimes second gear in the right type and amount of snow. Third gear is rarely used and even fourth gear is for the movement of the machine and (never) used for snow! It has the original carburetor, which has never been rebuilt or modified. She is a beautiful car that has served us very well. (April 2010) has itsImpeller and the impeller bottom with three layers of rust-O-painted oil, and the orange paint. * (This was for protection only and not for restoration DONE) * Nearly 40 years later, was taken to a carburetor kit carburetor bogging problem began to occur. The needle and clip, the upper ring "O", the bowl gasket and Power Jet have changed. However, the situation has occurred until I cleaned the holes Power Jet and changed the ring "O". The ring "O" was hard, a little '... Clothes Dryer Quickly
0 comments:
Post a Comment